Installing Software To All Pcs On Your Network - Belkin F5D9001 Series Manual

Installing Software to All PCs on Your Network

Installing Belkin SOHO Networking Software to all PCs on
your network
Now that your network is connected and the Network Card/Adapter
Drivers have been installed, we can configure the network. For each
computer you connect to the network, you must assign a network
address to be used by the other computers. Belkin has simplified this
process by providing you with the Belkin SOHO Networking
Software to configure your computers.
1. Insert the SOHO Networking Software that came with your
Network Starter Kit, into your CD-ROM.
2. From your desktop, double-click on "My Computer", then
double-click on the "D: drive" ("D" is usually the default drive
letter for the CD-ROM).
3. Double-click on the "Install.exe" icon and Windows will begin to
install the program onto your PC. After the program is installed,
Windows may ask you to restart your computer. Please do so.
4. Repeat steps 1-3 for each computer that you are connecting to
your network.
5. Once you have installed the Belkin SOHO Networking Software
on all of your computers, continue on to the next section.
13