Belkin F5D9001 Series Manual page 18

Configuring Your Computer Using Belkin NetSetup
4. After you have determined the static or dynamic addressing
scheme, the following screen will appear:
5. In the "Computer Name" field, type a name for the computer, such
as "Computer 1". The name must be different for each computer
that belongs to the same network/workgroup.
6. In the "Workgroup" field, type a workgroup name, such as "My
Network". The workgroup name must be the same for each
network or workgroup.
7. Use the description field to further identify the computer. Type in a
description, such as "Windows 98". This can be anything you want
and does not have to be different from, or the same as, the
description of any other computer on the network. You may
16