Installing The Cd Module - Audiovox NEXTGEN Installation Manual

INSTALLING THE CD MODULE (NGMCD2)
CAUTION: DO NOT INSERT CD UNTIL THE RADIO CONFIGURATION
IS COMPLETE! Refer to page 11 configuration instructions.
CD1. For installation of CD module (NGMCD2), follow steps 1-3 on page
Insert the CD Module into the Nextgen chassis until it clicks in
place.
CD2. Connect the 14-pin connector from the CD module to the Nextgen
chassis on the bottom left corner 14-pin socket.
CD3. Connect the 4-pin connector from the Nextgen CD Module to the 4-
pin socket on the backside of the faceplate.
11