Installing Memory - Dell 400 Owner's Manual

Installing Memory

CAUTION:
Product Information Guide.
NOTICE:
from your body before you touch any of your computer's electronic components. You can do so by
touching an unpainted metal surface on the computer.
1 Follow the procedures in "Before You Begin" on page 63.
2 Remove the computer cover (see page 68).
3 Lay the computer on its side so that the system board is on the bottom of the inside of the
computer.
4 Press out the securing clip at each end of the memory module connector.
5 Align the notch on the bottom of the module with the crossbar in the connector.
74
Removing and Installing Parts
Before you begin any of the procedures in this section, follow the safety instructions in the
To prevent static damage to components inside your computer, discharge static electricity
memory module
cutouts (2)
memory connector closest
to processor
securing clips (2)
connector
notch
crossbar