Removing Memory; Cards - Dell 400 Owner's Manual

Dell personal computer user manual
Hide thumbs Also See for 400:
Table of Contents

Advertisement

8 Connect your computer and devices to electrical outlets, and turn them on.
9 Right-click the My Computer icon and click Properties.
10 Click the General tab.
11 To verify that the memory is installed correctly, check the amount of memory (RAM) listed.

Removing Memory

CAUTION:
Product Information Guide.
NOTICE:
from your body before you touch any of your computer's electronic components. You can do so by
touching an unpainted metal surface on the computer.
1 Follow the procedures in "Before You Begin" on page 63.
2 Remove the computer cover (see page 68).
3 Press out the securing clip at each end of the memory module connector.
4 Grasp the module and pull up.
If the module is difficult to remove, gently ease the module back and forth to remove it from
the connector.

Cards

CAUTION:
Product Information Guide.
NOTICE:
from your body before you touch any of your computer's electronic components. You can do so by
touching an unpainted metal surface on the computer.
Your Dell™ computer provides the following slots for PCI and PCI Express cards:
Three PCI card slots
One PCI Express x1 card slot
One PCI Express x16 card slot
One PCI Express x4 card slot
76
Removing and Installing Parts
Before you begin any of the procedures in this section, follow the safety instructions in the
To prevent static damage to components inside your computer, discharge static electricity
Before you begin any of the procedures in this section, follow the safety instructions in the
To prevent static damage to components inside your computer, discharge static electricity

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dimension dctaDimension 9150Xps 400

Table of Contents