Installing The Memory Modules - Dell OptiPlex 5090 Small Form Factor Service Manual

Steps
1. Use your fingertips to carefully spread apart the securing-clips on each end of the memory-module slot.
2. Grasp the memory module near the securing clip, and then gently ease the memory module out of the memory-module slot.
NOTE: Grasp the memory module near the securing clip, and then gently ease the memory module out of the memory-
module slot.
NOTE: If the memory module is difficult to remove, gently ease the memory module back and forth to remove it from
the slot.

Installing the memory modules

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the memory modules and provides a visual representation of the installation
procedure.
44 Removing and installing components