Initial Setting; Channel Setting; Getting Channels Automatically - Magnavox CMWR10D6 Owner's Manual

Turn on this unit for the first time,
you need to follow these steps.
1
Press [STANDBY-ON
2
Turn the TV on. Select the input
to which the unit is connected.
Refer to the table on page 13.
TV's original
remote control
TV / VIDEO
*This button can
be labeled as
INPUT , AUX , etc.
"Initial Setup" will automatically
appear.
Initial Setup
English
Français
Español
If you have changed antenna
connection, we recommend that
you program available channels
in your area with the following
procedures.
Getting channels
automatically
1
Press [SETUP].
18 EN
Getting started

Initial setting

3
Using [K / L], select your
desired language on screen
menu. Then press
].
language.
"Channel Preset" will automatically
appear.
Initial Setup
Channel Preset
4
Press [OK] to start Channel
Preset.
The unit will start getting channels
available in your area.
Auto Presetting Now
After channel setting is finished,
"Clock Setting" will appear.
Then press [OK].
Initial Setup
Clock Setting
5
Follow to step 3 in "Manual
Clock Setting" on page 22.
• If a Public Broadcasting Station (PBS)
is available in your area, follow "Auto
Clock Setting" on page 21.

Channel setting

2
Using [K / L], select "Channel".
Press [OK].
Channel menu will appear.
3
Using [K / L], select "Auto
Channel Preset". Press [OK].
The unit will start getting channels
available in your area.
4
Press [SETUP] to exit.
• You can select only the
channels memorized in this unit
by using [CHANNEL
the Number buttons.
1
[ ]
OK to set
3
4
CH 1
2
3
- +
/ ] and
1
4