Initial Installation - Magnavox MDV630R Owner's Manual

D
Installing your DVD recorder

Initial installation

After you have successfully connected the DVD recorder and other devices to your TV (as
described in the previous chapter), this chapter will help you start the initial installation. The
DVD recorder automatically seeks and stores all available TV channels.
'Correct aiming' of the remote control
In the following sections, you require the remote control for the first
time. When using, always aim the front of the remote control at the
DVD recorder, not the TV.
Connecting additional devices
If you have connected additional devices (satellite receiver,...) via the
antenna cable, switch them on now. The automatic channel search will
recognize them and save them.
No antenna connected
If you are only using the DVD recorder as a playback device or you only
have a satellite receiver connected, you still need to perform the initial
installation. This is necessary so the basic settings can be saved correctly.
After the initial installation is completed once, you can used the DVD
recorder normally.
1
Select the desired language for the on-screen menu by pressing
B or A .
What is an on screen menu?
The multi-language on-screen menu takes the mystery out of using your
new DVD recorder. All settings and/or functions are displayed on your
TV screen in one of the available languages (English, French, or Spanish).
2
Confirm by pressing OK .
3
Select the desired audio language using B or A .
What is the audio language?
The DVD audio will play in the selected language if it is available. If this
language is not available on the DVD, the audio will play in the first
language on the DVD. The DVD disc menu will appear in the selected
language if it is available on the disc.
4
Confirm by pressing OK .
30
Tip
Menu Language
English
Español
?
Français
Press OK to continue
Audio Language
English
Español
Français
?
Português
Italiano
Press OK to continue
Installing your DVD recorder
Initial Setup
Initial Setup