NEC VERSA LITEPAD TABLET PC Manual page 99

5. Read the Warning screen.
A warning displays indicating that your hard disk is about to be
erased.
Select Continue to proceed to perform a Full Disk Drive restore.
6.
If you select Back, the recovery utility returns to the prior screen,
which has an exit option. If you select Continue, an NEC screen
loads.
At the NEC screen, click Continue to start the recovery process.
7.
A screen with progress bars is displayed and indicates the progress
of the recovery.
the recovery process.
At the prompt for the next CD, remove CD1 insert CD2 into the
CD-ROM drive. Select
When the recovery process is complete, you are prompted to
remove the CD from the CD-ROM drive and reboot your system.
At the prompt, remove the CD from the drive. Press
8.
Reboot, or press
A series of hardware detection screens display, the system reboots,
and the Windows Setup screen appears. Follow the on-screen
instructions to set up Windows.
Using the Operating System and Utilities 4-13
Do not turn off or disturb the system during
to start loading CD2.
OK
to reboot your system.
Alt-R
, click
Enter