Handling Cds; Memory Module - NEC VERSA LITEPAD TABLET PC Manual

Close the drive tray. The CD autoplays if it has an auto start file. If
4.
it does not auto start, launch the CD from My Computer.
Note
comes with the drive to install the Easy CD Creator software.
CD-R/RW drive from the system with Windows XP running, use the
Safely Remove Hardware function on the Windows XP taskbar.

Handling CDs

When handling CDs, keep the following in mind.
Always pick up the disc by its edges.
Avoid scratching or soiling either side of the disc.
Do not write on or apply labels to the data side of the disc.
Keep the disc away from direct sunlight or high temperatures.
Clean fingerprints or dust from the disc by wiping it with a soft
cloth. Gently brush the cloth from the center of the disc toward the
edge.
cleaner, static repellent, or any other chemical on the disc. Chemicals
and cleaners can damage the disc.

Memory Module

System memory is upgradeable from 256 MB to 512 MB. The NEC
Versa LitePad tablet PC has one 64-bit memory slot for a 144-pin
SO-DIMM (Small Outline Dual Inline Memory Module). The memory
slot is located on the back of your tablet PC.
See the following procedure to upgrade system memory.
5-8 Adding Expansion Devices
If you have a CD-R/RW drive, see the documentation that
When you remove the USB CD-ROM or
Avoid using benzene, paint thinner, record