Table of Contents
Advertisement
2-16 Setup and Operation
To enter a new password, reset the switch to "OFF," and follow the instructions
in Chapter 3, "Using Setup," to set up a new password. You may want to keep
this password in a special place so that you don't forget it again!
T
Switch 3 — Reserved for factory use.
T
Switch 4 — Reserved for factory use.
T
Switch 5 — Not used.
T
Switch 6 — Reserved for factory use.
Updating the System BIOS
Use the following steps to update your NEC Versa 6200MX system BIOS with the BIOS
Update Diskette (BUD). Specifically, the BIOS is the code transmitted onto your system's
microprocessor, or central processing unit (CPU).
If you are informed that the default BIOS needs an upgrade, to receive a copy of the BUD
contact the NEC Versa Diskette Fulfillment Center at (800) 842-6446, or NEC Customer
Service and Support at (800) 632-4525, Fax (508) 635-4100.
You should only use the BIOS upgrade diskette for your specific model.
Updating the BIOS involves the following procedures:
T
removing the speaker caps
T
lifting and moving the keyboard out of the way
T
setting the switch
T
reassembling the unit and updating the BIOS
T
resetting the switch.
NOTE
You only need to update the BIOS if NEC
makes significant improvements or fixes to the
current system BIOS. Your authorized NEC
dealer or Technical Support Services representa-
tive can help you determine this.
NOTE
If you purchased and are using this com-
puter outside the U.S., please contact a local
NEC office or dealer in your country.
Advertisement
Chapters
Table of Contents
