Table of Contents
Advertisement
2-14 Setup and Operation
T
Hard Disk — shows when the NEC Versa writes data to, or retrieves data from
the hard disk drive.
T
Caps Lock — appears when Caps Lock is used.
T
Scroll Lock — indicates that Scroll Lock is used.
T
Num Lock — indicates that Num lock is in effect.
T
Battery Status — displays the percentage of battery power available.
Battery 1 appears when you have one or more batteries installed.
Battery 2 appears when you have an optional battery installed in the
VersaBay II.
Function Keys (Fn Keys)
Function keys set specific system parameters and are built into the ROM. When using these
keys, simultaneously press
of ROM-based hot keys. ROM-based hot keys change system parameters temporarily. Hot
Key functions operate until the system is turned off or reset.
KEY
Fn F2
Fn F3
Fn F5
Fn F6
Fn F7
Fn F12
Fn Suspend
Smart Power Switch
Provides an automatic feature that prevents you from accidentally powering off the NEC
Versa, and losing your data while your system is in Suspend mode. The smart power switch
senses that the system is in Suspend mode and prevents you from directly powering off the
system when you press the power switch.
Fn
and the corresponding function key. See Table 2-3 for a list
Table 2-3 Fn Key Operations
FUNCTION
Highlight, toggles the contrast between standard and full.
LCD/CRT, toggles between LCD, CRT, TV out and
simultaneous modes (LCD and CRT).
Backlight, toggles the backlight between standard and full.
Speaker Volume, toggles speaker volume between high,
medium, low and off.
Power Management (P/M), sets P/M levels to highest
performance, longest battery life, custom values, or off.
Scroll/Lock On/Off
Save To File On Demand
Advertisement
Chapters
Table of Contents
