NEC POWERMATE PROFESSIONAL 9000 Service Manual page 137

Follow these steps to perform a customized restore of your original, factory-installed
operating system using OS Restore:
1. Power on or restart the system and immediately insert the Select Install disc into
the CD-ROM reader.
After the system boots from the CD, the Operating System Restore Welcome
screen appears (see the following figure).
Click
3. Continue
A License Agreement screen appears with three options: Back, Reject, and
Accept.
T
The
Back
T
The
Reject
T
The
Accept
you to continue.
NOTE: For systems with a SCSI hard disk, a
bootable diskette is included with the NEC Select
Install CD. In SCSI systems, first boot the
system from the bootable diskette. After the
system boots, proceed with the NEC Select
Install procedure described below.
Figure 2-21 Welcome Screen
to continue (or
Exit
button returns you to the Welcome screen.
button terminates the restoration process.
button signals that you accept the terms of the license and allows
Setup and Operation
to exit the program).
2-55