SMC Networks WEBS-N User Manual page 6

IC S
TATEMENT
This Class B digital apparatus complies with Canadian ICES-003.
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Cet appareil numérique de la classe B conforme á la norme NMB-003 du
Canada.
The device could automatically discontinue transmission in case of absence
of information to transmit, or operational failure. Note that this is not
intended to prohibit transmission of control or signaling information or the
use of repetitive codes where required by the technology.
IMPORTANT NOTE:
IC R E
ADIATION XPOSURE
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20 cm between the radiator and your body.
T NCC
AIWAN
根據國家通信傳播委員會低功率電波輻射性電機管理辦法規定：
第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更
頻率、加大功率或變更原設計之特性及功能。
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應
立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通
信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
EC C D
ONFORMANCE ECLARATION
The contact for SMC products in Europe is:
SMC Networks Europe,
C/Fructuós Gelabert 6-8 2
Edificio Conata II,
08970 Sant Joan Despí
Barcelona - Spain
Marking by the above symbol indicates compliance with the Essential
Requirements of the R&TTE Directive of the European Union (1999/5/EC).
This equipment meets the following conformance standards:
EN 60950-1: 2006 (IEC 60950-1) — Product Safety
◆
EN 55022:2006 + A1:2007, Class B — ITE EMC
◆
EN 55024:1998 + A1:2001 + A2:2003 — ITE EMC
◆
EN 300 328 V1.7.1 (2006-10) — Technical requirements for 2.4 GHz
◆
radio equipment
– 6 –
S :
TATEMENT
, 2 ,
o a
C
OMPLIANCES