MAC Address — The shared physical layer address for the Wireless-N
◆
Access Point/Repeater's LAN ports.
Hostname — The hostname of the STATIC or DHCP client.
◆
IP Address — Valid IP addresses consist of four decimal numbers, 0 to
◆
255, separated by periods. The default setting is 192.168.2.10.
Subnet Mask — Indicate the local subnet mask. (Default:
◆
255.255.255.0.)
LLTD — Link Layer Topology Discovery (LLTD) is a Microsoft proprietary
◆
discovery protocol which can be used for both wired and wireless
networks. (Options: Disable/Enable, Default: Enabled)
UPNP — Allows the device to advertise its UPnP capabilities. (Default:
◆
Disable)
– 39 –
C
6
| Access Point Mode Network Settings
HAPTER
Access Point Mode LAN Setting