Initial Configuration; Connecting To The Login Page - SMC Networks WEBS-N User Manual

4
C
ONNECTING TO THE
I C
NITIAL ONFIGURATION
The Wireless-N Access Point/RepeaterWireless-N Access Point/Repeater
offers a user-friendly web-based management interface for the
configuration of all the unit's features. Any PC directly attached to the unit
can access the management interface using a web browser, such as
Internet Explorer (version 6.0 or above).
L P
OGIN AGE
It is recommended to make initial configuration changes by connecting a
PC directly to one of the Wireless-N Access Point/Repeater's LAN ports. The
Wireless-N Access Point/Repeater has a default IP address of 192.168.2.10
and a subnet mask of 255.255.255.0. You must set your PC IP address to
be on the same subnet as the Access Point/Repeater (that is, the PC and
Access Point/Repeater addresses must both start 192.168.2.x).
To access the Wireless-N Access Point/Repeater's management interface,
follow these steps:
Use your web browser to connect to the management interface using
1.
the default IP address of 192.168.2.10.
2. Log into the interface by entering the default username "admin" and
password "smcadmin," then click Login.
It is strongly recommended to change the default user name and
N :
OTE
password the first time you access the web interface. For information on
changing user names and passwords, See
page 77.
– 28 –
"System Management" on