View System Log: Click this button to view the system log.
View Firewall Log: Click this button to view the firewall log.
Configuring the System Log: Click this button to display the following page.
In this page, you can set 3 types of system log modes, including Local, Remote, and
Both.
Local: When selecting Local, the events are recorded in the local memory.
Remote: When selecting Remote, the events are sent to the specified IP
address and UDP port of the remote system log server.
Both: When selecting Both, the events are recorded in the local memory or
sent to the specified IP address and UDP port of the remote system log
server.
After finishing setting, click the Apply/Save button to save and apply the settings.
Note:
If you want to log all the events, you need to select the Debugging log level.
10.3.6 SNMP Agent
Choose Management > SNMP Agent, and the following page appears.
User Manual
110