Interface Grouping - SMC Networks SMC7904WBRA-N2 - User Manual

User Manual
In this page, you can enable or disable writing operation from WAN or LAN side. After
proper configuration, click Apply/Save to apply the settings.

10.2.13 Interface Grouping

Choose Advanced Setup > Interface Grouping and the following page appears.
Interface grouping supports multiple ports to PVC and bridging groups. Each group
will perform as an independent network. To support this feature, you must create
mapping groups with the appropriate LAN and WAN interfaces using the Add button.
The Remove button will remove the grouping and add the ungrouped interfaces to
the default group. Only the default group has IP interface.
95