Step7
In this page, you may obtain the DNS server addresses from the selected
WAN interface or manually enter the static DNS server addresses. If only
a PVC with IPoA or static MER protocol is configured, you must manually
enter the static DNS server addresses. Click Next, and the following
page appears.
Step8
In this page, it displays the information about the PPPoE settngs. Click
Apply/Save to save and apply the settings. You can modify the settings
by clicking the Back button if necessary.
Adding a MER (IPoE) WAN service
This section describes the steps for adding the MER WAN service.
Step1
In the Wide Area Network (WAN) Service Setup page, click the Add
button to display the following page. (At first, you must add a ATM
configuration for this WAN service.)
User Manual
54