Wireless Bridge - SMC Networks SMC7904WBRA-N2 - User Manual

Deny: Reject the wireless clients with the MAC addresses in the MAC

Address list to access the wireless network of the wireless router.
Click the Add button to display the following page.
In this page, enter the MAC address of the wireless client, and then click the
Apply/Save button to add the MAC address to the MAC address list.

10.2.15.2 Wireless Bridge

Choose Wireless > Wireless Bridge to display the following page.
This page allows you to configure the wireless bridge features of the wireless LAN
interface.
AP mode: you may select Access Point or Wireless Bridge.

Bridge Restrict: Enable or disable the bridge restrict function.

Remote Bridges MAC Address: Enter the remote bridge MAC address.

After finishing setting, click the Apply/Save button to save and apply the settings.
User Manual
100