Table of Contents
Advertisement
Follow the steps to add or to change the default route or add a static
route:
Step 1: Click the Add button in the IP Routing Table screen to display the
following screen:
Step 2: Enter the following information:
Default Route: select if you want to specify a new default route. Note that the
Remote IP Address and Remote IP netmask fields do not appear if you select
this option.
CAUTION: Misconfiguring the default route may result in abnormal system
behavior and/or unnecessary telephone charges.
Static Route: select if you want to add a static route.
Remote IP Address: the remote IP address of the new route.
Remote IP Netmask: the IP netmask of the new route.
Gateway: identifies if the gateway is an IP address or interface.
Hop Count: the maximum number of hops for this route.
Step 3 Click APPLY.
IP Address Translation
Configuration
33
Advertisement
Table of Contents
