Chapter 1: Introduction; Overview; Figure 1-1 Front Panel; Figure 1-2 Rear Panel - SMC Networks 8126PL2-F Installation Manual

10/100/1000 l2-lite smb poe gigabit switch
Hide thumbs Also See for 8126PL2-F:
Table of Contents

Advertisement

Chapter 1: Introduction

Overview

The TigerSwitch 10/100/1000, SMC8126PL2-F, is an intelligent Layer 2 switch with
26 10/100/1000BASE-T ports, four of which are combination ports
with four SFP transceiver slots (see Figure 1-1, Ports 21-24).
The switch's 24 10/100/1000 Mbps ports support the IEEE 802.3af
Power-over-Ethernet (PoE) standard that enables DC power to be supplied to
attached devices over wire pairs in the connecting Ethernet cable.
The SMC8126PL2-F includes an SNMP-based management agent embedded on
the main board, which supports both in-band and out-of-band access for managing
the switch.
The switch can easily tame your network with full support for Spanning Tree
Protocol, Multicast Switching, and Virtual LANs. It brings order to poorly performing
networks by segregating them into separate broadcast domains with IEEE 802.1Q
compliant VLANs, empowers multimedia applications with multicast switching and
CoS services.
SMC8126PL2-F
AC Power Socket
*
If an SFP transceiver is plugged in, the corresponding RJ-45 port is disabled for ports
21-24.
Port Status LEDs
10/100/1000 Mbps RJ-45 Ports (PoE Ports)

Figure 1-1 Front Panel

Figure 1-2 Rear Panel

RJ-45 Ports (Non-PoE)
Redundant Power Supply
*
that are shared
RJ-45 Ports LED
Mode button
Console Port
SFP Slots
SFP Present
System LEDs
1-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tigerswitch smc8126pl2-f

Table of Contents