SMC Networks 7904WBRB2 - annexe 1 Manual page 79

Channel and SSID
You must specify a common radio channel and SSID (Service Set ID) to
be used by the Barricade and all of its wireless clients. Be sure you
configure all of its clients to the same values.
Parameter
SSID
SSID Broadcast
Wireless Mode
Channel
Description
Service Set ID (SSID) is the name given to the wireless network.
The SSID must be the same on the Barricade and all of its
wireless clients.
Enable or disable the broadcasting of the SSID. Disabling
broadcasting of the SSID provides added security by hiding
your wireless network.
This device supports both 11g and 11b wireless networks. Make
your selection depending on the type of wireless network that
you have.
The radio channel used by the wireless router and its clients to
communicate with each other. This channel must be the same
on the Barricade and all of its wireless clients.
The Barricade will automatically assign itself a radio channel, or
you may select one manually.
C
ONFIGURATION
P
ARAMETERS
4-35