SMC Networks 1255FTX-SC Installation Manual page 8

Secondary Installation
Follow this procedure if you have already installed another
network card, configured Windows NT Networking, or loaded
another driver.
1. Install the SMC network card (if not already installed), attach
the network cable, and boot Windows NT.
2. Double-click on the "My Computer," "Control Panel," and
"Network" icons. From the "Network" window, select the
Adapter tab.
3. Do not select any of the network cards listed. Select "Add."
4. You are presented with the "Select Network Adapter" window.
Click on "Have Disk."
5. You are presented with the "Insert Disk" window. Specify the
path to the NT directory of the installation CD (e.g.,
D:\winnt) and click on "OK."
6. Select the SMC1255FTX-SC adapter, and click on "Next."
7. You are presented with the "Network Card Setup" window
where you can specify the network card data rate.
"AUTONEGOTIATE" is the recommended setting for the network
card. Select "OK" after verifying the network card settings.
8. You are presented with the "Network" window where the SMC
network card is now listed as an installed adapter. At this
point you can select "Close" to exit the Network applet and
follow the prompts to restart Windows NT.
9. Select "Yes" when prompted to reboot for the changes to take
effect.
13
For Further Customization
You can modify card settings via the "Network" applet. Install
additional protocols and network components by selecting the
appropriate folder (e.g., Customizing Protocols, Services,
Identification, or Bindings).
14