SMC Networks 1255FTX-SC Installation Manual page 4

INSTALLING AND CONFIGURING NETWORK DRIVERS
Windows 95/98/Me/2000 Installation
You may find that the instructions here do not exactly match your
version of Windows. This is because these steps and screenshots
were created from Windows 98. Windows 95, Windows Millennium
Edition, and Windows 2000 are very similar, but not identical, to
Windows 98.
Notes:
A.For Windows NT and Window XP installations, please skip
to page 13 for instructions.
B. Installation processes such as these usually require the
use of your original, licensed copy of Windows. Please
have your Windows CD on hand BEFORE proceeding with
the installation.
1. After you have inserted the SMC1255FTX-SC in your machine, the
Windows operating system will automatically recognize the adapter
and prompt you for the appropriate drivers. Click the "Next" button
to begin the installation.
5
2. Insert the Driver CD and select the "Search for the best driver
for your device" option and click "Next".
3. Clear all checkboxes except for "Specify a location:" Then press
the "Browse" button and look for the drivers on your CD-ROM.
("[CD drive]:\. In most cases, this is D:\.)
4. The system should find the drivers. Now click the "Next" button
to continue the installation.
Note: If the system could not find the drivers, click the "Back"
button, and select the "Display a list of all the drivers..." option.
Select "Network Adapters" from the list of devices, press "Have
Disk" and once again browse to the location of the drivers.
6