SMC Networks 1255FTX-SC Installation Manual page 5

5. Once the system has copied the SMC drivers from the CD, it may
then request files from your original Windows disk. Please insert
the Windows CD at this time.
6. The system will copy the files. Do NOT press "Cancel."
7. Once all the necessary files are copied from the Windows disk,
the driver install process will be complete. Click "Finish" to exit
the wizard.
7
8. You will then be prompted to reboot the machine. Please press
"Yes. " Upon reboot, the SMC1255FTX-SC will be initialized and
ready for use.
Optional Procedures to Modify Card Settings and Add
Network Protocols
• Double-click on the "My Computer," "Control Panel," and
"Network" icons. The "Network" dialog box appears. If the
correct network protocols are not installed in the "Primary
Network Logon" list box, select the primary network to which
you will be attaching. Click on "Add." The "Select Network
Component Type" dialog box appears. Follow the on-screen
directions to select network protocols.
• For peer-to-peer networks, you may wish to enable "File and
Print Sharing" in the "Network" dialog box.
• To modify other network card properties, select the appropriate
tab or click on the "Properties" button from the "Network"
dialog box and modify properties as desired.
8