Default Settings - VDO PN 4000 User Manual

Settings
75

Default settings

This button allows you to completely delete data such as the address book or
Bluetooth pairing data and, if necessary, reset the factory defaults. These options
can be used if you want to pass the navigation system on to someone else with-
out your personal settings or addresses. The device system is returned to the
condition in which it was supplied.
Clear addresses: Tap this button to permanently delete all the addresses stored
in your address book. A confirmation screen appears for security purposes so you
can either confirm or cancel the delete.
Reset to factory settings: Tap this button to reset the system to the factory
settings.
Caution: All your personal settings will be permanently deleted! A confirmation
screen appears for security purposes so you can either confirm or delete the
procedure.
Delete all pairings: Tap this button to delete the list of paired Bluetooth devic-
es. Before the list is deleted a confirmation screen appears for security purposes.
Security code settings: Tap this button to protect your navigation system with
a password (security code). The following options then allow you to enter a
security code or delete the current code. The password is then requested each
time the system is restarted. The system cannot be used if the valid password is
not entered. The security code may contain letters and/or digits. The maximum
length of the security code is 16 digits. Do not use any special characters.
You can use this function to protect the personal data (addresses) that is stored
on your navigation device. Make a note of the password and store it in a safe
place.
Use this button to delete a defined password.