Download Print this page

General Notes; Safety Instructions - VDO MM 5200 Owner's Manual

Advertisement

Notes on operating instructions
Please read this information carefully and follow all the instructions outlined below. This will
ensure reliable operation and durability of your unit.
Keep the packaging and operating instructions in a safe place in order to pass them on to a
subsequent owner in the event of selling the unit at a later date.
The following reading aids are used to simplify these operating instructions:
asks you to perform an action.
:
shows the unit's reaction.
provides extra info.
❏ identifies a list.
A
Safety instructions and warnings contain important information for the safe use of the unit.
Failure to observe this information may result in material damage or personal injury. Therefore,
please observe this information with particular care.

Safety instructions

A
For safety reasons, the driver should not watch TV/DVD or similar when driving.
Please note that it is illegal in certain countries to watch or to operate a TV/DVD or similar device
when driving.
A
Only use the monitor for its intended purpose.
A
If an electronic reverse monitoring camera is used, ensure that this does not cause a hazard.
Any damage caused through the use of such systems is the sole responsibility of the driver.
A
Do not clean using cleaning fluid, alcohol or other solvents. Use only a damp cloth.
Features
The MM 5200 was developed primarily for the high-quality display of navigation images.
Other video sources (e.g. reversing camera RV 5100 or RV 5200) can also be connected. The
compact dimensions facilitate a variety of integration solutions in the driver's field of vision.
A number of different installation positions can be achieved using the supplied monitor
holder.
❏ 3.6-inch 16:9 TFT LCD colour monitor
❏ Resolution: 320 x 234 pixels (horizontal x vertical)
❏ PAL/NTSC-compatible (automatic detection)
❏ RGB and CVBS input (Mitsumi plug)
❏ Removable 6 m monitor cable
❏ Special monitor holder with extensive adjustment options
❏ Automatic and manual brightness control
❏ Mirror function for overhead installation
❏ Integrated infrared receiver

GENERAL NOTES

3

Advertisement

loading