Setup - VDO CD 2104 User Manual

SETUP

It is possible to modify many of the set's default settings according to your preferences via '
• Long press on DISPLAY
• Press or to select one of the options in the menu you want to modify.
Turn the
• Rotary Knob
• Long press on DISPLAY button to exit the 'SETUP' menu.
The set automatically leaves this mode after 30 seconds if no key presses are made.
Option Value/Setting
( ) (
or
Rotary Knob
LOUD [LOUD OFF,
LOW,MID,HIGH ]
TAVOL [0 to 47]
TA FAD [F7 to R7]
TA EON [DX LO OFF ]
START [1 to 47]
MUTE [0 to 16]
BEEP [0FF , 1, 2, 3, 4, 5]
S-VOL* [OFF, 1,2,3,4]
TEL [TEL OFF,
MUTE LO,
MUTE HI ]
CLK [ON, OFF]
CLOCK [RDSCLOCK,
MANCLOCK]
CLOCK
[12HCLOCK,
FORMAT 24HCLOCK]
[CLOCKSET]
* Depending on version
14
button to enter the 'SETUP' menu.
to select the value/setting.
Usage
)
Select the level of loundness control
Select volume level of Traffic
and Alarm messages.
Adjust the front and rear fader level of Traffic Announcement,
News bulletins and Alarm messages.
Select 'LO ' if you will search only for strong stations during search
TA EON
– Select the start-up volume when power on.
– After modification of the start-up volume, if the set is
switched off and on within 10 minutes, the start-up volume
reverts to the last used volume setting.
– After modification of the start-up volume, if the set is
switched off and on after more than 10 minutes later, the
start-up volume is the level defined in 'SETUP'.
Select the mute level.
Select volume level of confirmation beeps.
– Select the SMART Volume compensation level (only when
connected and calibrated, see 'SMART Volume' in
'INSTALLATION' and 'SPECIAL FUNCTIONS').
Level 1 gives a s maller increase while level 4 gives a greater
increase with respect to the car's speed.
– Select 'TEL OFF' if no car phone is connected to the set.
– Select 'MUTE LO' or 'MUTE HI' (according to phone type)
to automatically interrupt the set's sound output when
using your car phone.
Select 'ON' to activate CLOCK feature.
Select 'RDSCLOCK' to activate RDS clock or "MANCLOCK'
to set clock manually.
Select desired clock format.
If 'MANCLOCK' selected, set the time by:
1. Use
2. Repeat stept to set the minutes digit.
Announcement, News bulletins
to select the hour digit and turn the Rotary Knob to adjust.
'.
SETUP