Aiwa XR-MD95 Operating Instructions Manual page 10

PRESETTING STATIONS
TUNER/
BAND
TUNER/
0-9,+10
I I
BAND
The unit can store a total of 32 preset stations. When a station
is stored, a preset number is assigned to the station. Use the
preset number to tune in to a preset station directly.
1
2
3
Press the TUNER/BAND button to select a band.
Then, press the ++ or > button to select a
station.
Press the II button to store the station.
A
station is assigned a preset number, beginning
consecutive order for each band.
Preset number
I
Frequency
Repeat steps 1 and 2.
from 1 in
PRESET NUMBER TUNING
7
Press the TUNER/BAND button to select a band.
2 Press the numbered buttons on the remote
control to select a preset number.
Example:
To select preset number 15, press the +1 O and 5 buttons.
To select preset number 10, press the +1 O and O buttons.
Another method to tune
in to a preset station
Press the TUNER/BAND button to select a band.
Then press the F button on the control panel.
Each time the button is pressed, the station with the next higher
number is selected.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
the button, and press the II button within 4 seconds.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.
m
Each band can only store a maximum of 16 preset stations.
10 ENGLISH