Sources; The Sound Using External - Aiwa XR-M70 Operating Instructions Manual

LINE OUT JACKS
This system can output analog sound signals for all functions
through these jacks.
Use a cable with RCA phono plugs to connect audio equipment.
m
Do not connect equipment to the LINE OUT jacks and AUX IN
jacks simultaneously.
Otherwise, noise is generated and malfunctions may occur.
SUPER WOOFER d JACK
Connect an optional powered sub woofer with a built-in-amplifier
to the jack.
LISTENING TO EXTERNAL
SOURCES
TAPE/AUX
RECORDING THE SOUND USING
EXTERNAL EQUIPMENT
To
record the CD sound on an MD
Connect an MD recorder to the CD DIGITAL OUT (OPTICAL)
jack.
Play back the CD to be recorded and start recording on the
connected MD recorder.
To record the sound on a cassette tape
Connect a cassette deck to the LINE OUT jacks.
Play back the source to be recorded (CD or radio) and start
recording on the connected cassette deck.
To play equipment connected to the TAPE IN jacks, press the
TAPE button on the control panel.
To play equipment connected to the AUX IN jacks, press the
AUX button on the control panel.
When using the remote control, press the TAPE/AUX button
repeatedly until "TAPE" or "AUX" is displayed.
ENGLISH
15