Operation - Aiwa XR-M70 Operating Instructions Manual

BEFORE OPERATION
Remote
~
sensor '--
O? 00
1
POWER
Pressing the ~ button orthe TUNER/BAND button turns the
power on and starts play of the corresponding source (Direct
Play Function).
Furthermore, ejecting the control panel (see the right column)
while the power is off also turns the power on.
After use
Press the POWER button to turn off the power. The display
changes to the clock.
Using the headphones
Connect headphones to the PHONES jack with a stereo mini
plug (03.5 mm, '/8 inch).
No sound is output from the speakers while the headphones are
plugged in.
USING THE CONTROL PANEL
1' 1
(20
0
00
CONTROL
Control panel
To eject the control panel
Press the CONTROL OPEN/CLOSE button when the power is
turned on or off. The control panel will pop out.
To close the control panel, press the button again.
Buttons on the control panel
Control buttons
[ 1
F
VOLUME
SOUND MODE
Function buttons
The function buttons select the source to be played.
The control buttons allow you to control the playback of a CD,
and tune in to a desired broadcasting station.
There are also a button and a control used to make adjustments
to the volume level and sound quality to suit your preferences
on the control panel.
m
The - button on the CD player unit immediately starts CD
playback; i.e., pressing the button starts playback regardless of
the source currently selected.
6
ENGLISH