Table of Contents
Advertisement
OTHER
—
OPTIONAL EQUIPMENT
CD DIGITAL OUT
- (OPTICAL)
Refer to the operating instructions of the connected Scuement
for details.
* The connecting cords are not supplied: Obtain the necessary
connecting cords.
* Consult your local Aiwa dealer for optional equipment.
ED SREB
AT
LAR
RRA
ES
TS
TT
Ea
SES
ER RONEN
SURE
VIDEO/AUX JACKS
This unit can input analog sound signals through these jacks.
Use a cable with RCA phono plugs to connect audio equipment
_ (turntables, LD players, MD players, VCRs, TV, etc.).
'Connect the red plug to the VIDEO/AUX R jack, and the white
plug to the VIDEO/AUX L jack. .
When connecting a turntable
Use an Aiwa turntable equipped with a built-in equalizer amplifier.
cD DIGITAL OUT (OPTICAL) JACK
This unit can output CD digital sound signals through this jack.
Use an optical cable to connect digital audio equipment (DAT
deck, MD recorder, etc.).
Remove the dust cap @ from the CD DIGITAL OUT (OPTICAL)
jack. Then, connect an optical cable plug to the CD DIGITAL
OUT (OPTICAL) jack.
Ut
ZO
reel
isa
pt
Stier
;
(a)
|
When the CD DIGITAL OUT (OPTICAL) jack is not being
used
.
Attach the supplied dust cap.
22. ENGLISH
# LISTENING TO EXTERNAL SOURCES
To play equipment connected to the VIDEO/AUX jacks proceed
as follows.
;
1 Press VIDEO/AUX. —
"VIDEO" appears on the display.
2 Play the connected equipment.
To change a source name in the display
When VIDEO/AUX is. pressed, "VIDEO" is displayed initially. It
can be changed to "VIDEO", "AUX" or "TV".
With the power on, press POWER while pressing VIDEO/AUX.
Repeat the procedure to seléct one of the names.
Advertisement
Table of Contents
