Assembling The Booster; Attaching The Backrest - Chicco KEYFIT STRADA BOOSTER Manual

ASSEMBLING THE BOOSTER

Attaching the Backrest

Pull out the seat back lock on the
1
booster seat base by pressing button.
Align backrest as shown.
2a
Match the backrest joint
2b
to seat joint.
Slide the two silver backrest locking
3
buttons (located on the joint) in towards
the center and lower backrest into
backrest/seat joint.
1
2a 2b
3
12
ASSEMBLING THE BOOSTER
Release the 2 buttons to attach the
4
backrest.
Check that the backrest and seat
are correctly locked to each other by
pulling on assembled Booster Seat.
After attaching, press button and push
5
in seat back lock on the booster seat
base.
Make sure booster Seat Back
Lock is pushed in completely before
use.
After attaching, raise backrest by
6a
squeezing the backrest height adjust
lever.
Tuck fabric panel up between the
6b
backrest fabric cover and the backrest
frame.
Be sure fabric panel is smoothly
resting between the fabric cover and the
frame to provide extra padding.
4
5
6a
6b
13