Installing The Booster With Backrest; Securing Child In Booster With Backrest - Chicco KEYFIT STRADA BOOSTER Manual

Booster seat
Table of Contents

Advertisement

USING BOOSTER
WITH
BACKREST
Installing Booster WITH Backrest
Place the booster on the vehicle seat,
1
leaning the backrest against the back of
the vehicle seat.
Check that the headrest of the vehicle
2
seat does not interfere with the headrest
of the booster. If the vehicle headrest
pushes the booster headrest forward,
remove the vehicle headrest where
the booster will be installed, if possible.
Replace the vehicle headrest when the
booster is removed.
The booster backrest must fit
3
flat against to the vehicle seat.
1
2
3
20
USING BOOSTER
WITH
BACKREST
Securing Child in Booster
WITH Backrest
Place the child into the belt positioning
1
booster, sitting all the way back, ensuring
that the child's back is against the booster
backrest.
Route the lap belt under both armrests
2
through the red lap belt guides, across
the child's thighs. Then route the
shoulder belt under the armrest closest to
the vehicle buckle as shown.
1
2
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Keyfit strada

Table of Contents