Replacing Fabric Covers - Chicco KEYFIT STRADA BOOSTER Manual

REMOVING FABRIC COVERS
Position the child restraint upright on a
3
flat surface.
Hold both armrests and pull up to
4
release the top part of the booster seat.
Release the fabric cover by
5
unfastening the 5 fabric cover hooks
located on the underside of the top part
of the seat.
Remove the fabric cover from the top
6
part of the seat.
Be sure to lift fabric covers
carefully around all red belt
guides.
3
4
5
6
38
REMOVING FABRIC COVERS

Replacing Fabric Covers

Repeat Removing Fabric Cover steps in the reverse order, ensuring that
the fabric cover fits onto and adheres correctly on the frame, in particular
in the red areas, which correspond to the belt guides.
Be sure to fit fabric covers carefully around all red belt guides.
Check that the top and
lower parts of the seat are
correctly locked to each other
with the small reference
circles (located on the black
plastic) fully aligned
to the CLOSE position.
Pull on booster seat Base
to make sure Base is locked
securely. Make sure there
are no gaps between the top
and bottom parts.
The child restraint must never
be used without the fabric
cover. It could be dangerous
for your child.
39