Gb ) Operating Instructions - Vivanco UNIVERSAL PLUG-IN POWER UNIT AND USB CHARGING ADAPTER Operating Instructions Manual

Universal Switchmode AC to DC Mains Adapters with USB Charging Function
Operating instructions:
B E F O R E you connect the AC adapter to the device or the
mains supply, make sure that the output voltage (V), the output
current (mA) and the polarity correspond to the device you wish
to power.
OUTPUT VOLTAGE (V)
Check first which input voltage is required by the device to be
connected. Then set the selector button of the AC adapter to
the required voltage. Setting the voltage too high may lead to
the malfunction or destruction of the connected device. For
USB power output, replacement of charging by computers, the
selector must be set to 6V!
OUTPUT CURRENT (mA)
Make sure that the connected device does not consume more
current than the maximum output current of the AC adapter
permits. Exceeding the maximum capacity may overload and
destroy the AC adapter.
The maximum current that the individual models in this series
can supply at different voltages is given in the Technical Data
table.
POLARITY
Consult the manufacturer's instructions for the device or the
diagram engraved on the mains connector of the device to
determine the polarity required by your device. Now select the
appropriate connector plug for the device. The following 9/7
(NL1001XR USB) plug sizes are available:
2,5mm / 3,5mm / 5,0x2,1mm / 5,5x2,5mm / 3,5x1,35mm /
4,0x1,7mm / 5,5x1,5mm / 2,35x0,75mm / USB A socket.
Vivanco GmbH, Ewige Weide 15, D-22926 Ahrensburg, hotline@vivanco.de
The plugs have polarity markings on each side (see illustration).
Having selected the correct polarity, insert the plug into the
connector socket with the symbols pointing towards each other
GENERAL NOTES
The indicator lamp on the top of the AC adapter shows
that it is ready to use.
If your device does not work properly (lamp = off),
disconnect the AC adapter immediately from the device
and the mains socket and check your settings against the
device manufacturer's instructions.
We accept no liability for damage caused by improper
handling (e.g. incorrect polarity/voltage settings)
Do not open the AC adapter. Repairs must be carried out
by trained specialists only.
Only use the AC adapter in dry places and do not leave
children unsupervised while the AC adapter is in use.
Never insert the output plug for the device into the mains
socket.
USB Charging Applications: allthough properly connected
and adjusted a connected device may refuse charging.
This is not a power adapter fault, but indicates that such
device needs a special power adapter. Please ask for
special charging adapters from Vivanco for that kind of
devices.
Save Energy: Your adapter is using the energy saving
switch-mode technology. But you can save even more
energy and money, when you disconnect the adapter
from mains, if you don´t use the powered device for a
longer time periode.
2