Hinge Cover - Dell Inspiron 6000 Owner's Manual

Hinge Cover

CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface (such as a connector on the back of the computer).
NOTICE:
To avoid damaging the system board, you must remove the main battery before you begin working inside
the computer.
1 Follow the procedures in "Before You Begin" on page 75.
2 Remove the hinge cover.:
Open the display all the way (180 degrees) so that it lies flat against your work surface.
a
NOTICE:
To avoid damaging the hinge cover, do not lift the cover on both sides simultaneously.
Insert a scribe in the indent to lift the hinge cover on the right side.
b
Ease the hinge cover up, moving from right to left, and remove it.
c
NOTE:
When replacing the hinge cover, first insert the left edge and then press from left to right until the cover
snaps into place.
hinge cover
Adding and Replacing Parts
89