Turning Your Jabra Halo On And Off; Pairing Your Jabra Halo To A Phone Or Other Device - Jabra HALO User Manual

TURNING YOUR JABRA HALO ON AND OFF

Unfolding the headset will turn it on.
Folding the headset will turn it off.
- To fold: Carefully extend the headset at the hinges (3) and fold.
The headset will now conveniently fold into a compact size.
- To unfold: Carefully unfold the headset and lock the hinges into
place.
The headset will automatically turn off after 10 minutes if not
connected to a device.
PAIRING YOUR JABRA HALO TO A PHONE OR OTHER
DEVICE
Headsets are connected to phones or other Bluetooth devices
using a procedure called 'pairing' . By following a few simple steps,
pairing can be done in a matter of seconds.
1. Put the headset in pairing mode
1.a. First time pairing
- Fold and Unfold the headset and the Jabra HALO will automatically
enter pairing mode (indicator light (5) is solid blue) and start
searching for a device.
1.b. Later pairing
- Press and hold the Answer/End button (1) until the indicator
light (5) is solid blue (approximately 4 seconds).
2. Set your Bluetooth phone or device to search for the
Jabra HALO
- Follow your phone's instruction guide. First make sure that
Bluetooth is activated on your mobile phone. Then set your
phone to search for the headset. This usually involves going
to a 'setup, ' ' connect' or 'Bluetooth' menu on your phone and
selecting the option to search for or 'add' a Bluetooth device.*
3. Your phone will find the Jabra HALO
- The phone will find the headset under name "Jabra HALO".
- Your phone then asks if you want to pair with the headset.
- Accept by pressing 'Yes' or 'OK' on the phone and confirm with
the passkey or PIN = 0000 (4 zeros). Your phone will confirm
when pairing is complete.
* Refer to phone's user manual
JABRA HALO
5