Need More Help - Jabra HALO User Manual

I cannot hear music in the headset
- Ensure that the headset is connected to your Bluetooth
enabled device.
- You may have been out-of-range (10 meters) to your Bluetooth
enabled device or the headset might have experienced an ESD
(Electrostatic discharge) incidence. Press the Multi Function
Button to re-establish the Bluetooth audio link
- Increase the volume on your device.
- Make sure that the Jabra HALO is charged.
The music I hear sounds very poor
Make sure the other device supports Bluetooth 1.1 or higher
including the Advanced Audio Distribution Profile (A2DP) for
music streaming.
If the above procedure did not help then it is possible that your
phone is using the stereo audio connection in a different way. You
can enable this mode on Jabra HALO by performing pairing in the
following way:
- Remove the Bluetooth connection to Jabra HALO on your
phone
- Make sure the headset is on (un-folded)
- Press and hold the answer / end button for more than 5 seconds
until the both Display icons are solid Blue and solid Orange
- Go through the regular steps in pairing the headset to a
Bluetooth device.
Be aware that standby time of the Jabra HALO can be lower when
using this pairing.

NEED MORE HELP?

1. Web:
www.jabra.com
(for the latest support info and online User Manuals)
2. E-mail:
Deutsch
English
Español
Français
Italiano
support.de@jabra.com
support.uk@jabra.com
support.es@jabra.com
support.fr@jabra.com
support.it@jabra.com
JABRA HALO
10