How To Pair Your Jabra Bluetooth Hub And Headset; Adjusting Settings With A Test Call From Your Desk Phone - Jabra JX10 User Manual

How to pair your Jabra Bluetooth Hub and headset

IMPORTANT: Your Bluetooth Hub and headset have been pre-paired at the factory, so
this step is only necessary if pairing has been lost, e.g. by resetting.
•
Set your headset into pairing mode by pressing its pairing button . The LED will
show a steady blue light.
•
Set your Bluetooth Hub in pairing mode by pressing and holding its pairing button .
The LED will show a steady blue light, and the two devices will 'search' for each
other.
NOTE: Both devices will continue to search for a pair for 5 minutes.
•
When your headset and Bluetooth Hub have paired successfully, the Bluetooth Hub
LED will flash blue 10 times and the headset LED will flash blue slowly.
NOTE 1: If you accidentally put either the Bluetooth Hub or headset into pairing mode, tap
the pairing button  /  to exit pairing mode.
NOTE 2: To be able to use Voice Dial from your mobile phone, please note that you need
to pair the Jabra JX10 headset with the Bluetooth Hub before you pair the headset to your
mobile phone.
One Bluetooth Hub can be paired with multiple headsets, just as one headset can be
paired with multiple Bluetooth Hubs. Your headset will 'prioritize' the Bluetooth Hub it
has been paired with most recently.
•
If the Bluetooth Hub is paired with multiple headsets, and more than one headset
is in range, the Bluetooth Hub will seek to establish communication with the most
recently connected headset.

Adjusting settings with a test call from your desk phone

•
Place the headset on your ear and tap the headset Answer/End button. The handset
will be lifted automatically, establishing a dial tone.
•
If dial tone is missing or unclear, slowly slide the Dial Tone Switch  from A through
G until you hear a clear dial tone. The Dial Tone Switch is preset to setting A, since that
setting is most commonly used.
•
Dial a friend so you can test the volume of your microphone (how your voice sounds
to others).
•
Adjust the headset microphone volume  in the Bluetooth Hub until your friend
confirms that your voice can be heard at an appropriate level.
•
To end the call, tap the headset Answer/End button. The handset will be lowered
automatically.
18