Switching From Headset To Handset; Switching From Handset To Headset; Staying Within Range - Jabra JX10 User Manual

Switching from headset to handset

You can switch from your headset to your desk phone handset during an active call. You
might want to do this if, for example, your headset battery is running low.
•
Pick up the desk phone handset.
•
If necessary, press the appropriate button on your desk phone (see your desk phone
User Manual).
•
Tap the headset Answer/End button, or place it into the desk stand
The call will be transferred to your desk phone handset.

Switching from handset to headset

You can switch from your desk phone handset to your headset during an active call. You
might want to do this if, for example, the call was answered on the desk phone handset
and you would prefer to use your headset.
•
Keep the desk phone handset off the hook.
•
Tap the headset Answer/End button.
•
If necessary, press the appropriate button on your desk phone (see desk phone User
Manual).
The call will be transferred to the headset.
NOTE: On some desk phones, you might hear an echo. This is because the headset and
handset audio links are both open. If this happens, replace the desk phone handset.

Staying within range

The sound in your headset will deteriorate if you move beyond range* on the Bluetooth
Hub. Move back into range to restore sound quality.
If you move too far from the Bluetooth Hub, the call will be routed to your desk phone
handset. Return into range within 60 seconds and the call will be re-routed back to
the headset. If you stay out of range for more than 60 seconds, the call may remain
active (this is phone dependent, please check your desk phone User Manual for more
information).
Remember!
In general, you will get better performance when there are no obstructions between
your headset and your Bluetooth Hub.
* up to 33 feet/10 meters in line of sight
16
for charging.