APRILIA PEGASO 650 IE - PART1 02-2001 Manual page 19

NOTE
The electrical parts work only when the ignition switch
is in position " ".
1) ENGINE STOP SWITCH (
a
WARNING
Do not operate the engine stop switch "
conditions.
This is a safety or emergency switch.
With the switch pressed in position " ", it is possible to start
the engine; when the switch is pressed to position " ", the
engine stops.
a
CAUTION
With stopped engine and ignition switch in position " ", the
battery may discharge.
When the vehicle has come to rest, after stopping the en-
gine, move the ignition switch to position " ".
2) LIGHT SWITCH ( -
When the light switch is in position "
the switch is in position "
board light are on; when the switch is in position "
parking lights, the dashboard light and the low beam are on.
The high beam can be operated by means of the dimmer
switch.
3) START PUSH BUTTON ( )
When the start push button " " is pressed, the starter makes
the engine run. For the starting, see p. 44 (STARTING).
- )
- " in running
•
- ) (not provided for )
•
", the lights are off; when
", the parking lights and the dash-
", the
use and maintenance Pegaso 650 I.E. 19