ZyXEL Communications ZYWALL 2 Quick Start Manual page 6

1 Click MAINTENANCE in the
navigation panel and then
Device Mode.
2 Select Bridge and configure a
(static) IP address, subnet
mask and gateway IP
address. These apply to the
ZyWALL's LAN and WAN
interfaces.
3 Click Apply. The ZyWALL
restarts.
4 Internet Access Setup and Product Registration
1 Click Internet Access in the HOME screen to open the Internet access wizard.
Enter the Internet access information exactly as given to you.
If you were given an IP address to use, select Static in the IP Address Assignment drop-down list box and
enter the information provided.
Note: The fields vary depending on what you select in the Encapsulation field. Fill them in with the
information provided by the ISP or network administrator.
Click Apply when you are done.
ENGLISH
6