Diagnostics - ZyXEL Communications ZYWALL - CLI Reference Manual

C
H A P T E R
This chapter covers how to use the diagnostics feature.

41.1 Diagnostics

The diagnostics feature provides an easy way for you to generate a file containing the
ZyWALL's configuration and diagnostic information. You may need to generate this file and
send it to customer support during troubleshooting.
41.2 Diagnosis Commands
The following table lists the commands that you can use to have the ZyWALL collect
diagnostics information. Use the
mode to be able to use these commands.
Table 194 diagnosis Commands
COMMAND DESCRIPTION
Has the ZyWALL create a new diagnostic file.
diag-info collect
Displays the name, size, and creation date (in yyyy-mm-dd hh:mm:ss format) of the
show diag-info
diagnostic file.
41.3 Diagnosis Commands Example
The following example creates a diagnostic file and displays its name, size, and creation date.
Router# configure terminal
Router(config)# diag-info collect
Please wait, collecting information
Router(config)# show diag-info
Filename : diaginfo-20070423.tar.bz2
File size : 1259 KB
Date : 2007-04-23 09:55:09
ZyWALL (ZLD) CLI Reference Guide
Diagnostics
command to enter the configuration
configure terminal
41
347