Initial Configuration - ZyXEL Communications ZYAIR G-5100 Quick Start Manual

9 Connect the MIL-C-5015
style Ethernet connector
to the special Ethernet
port on the bottom of the
ZyAIR.
Connect the RJ-45
Ethernet connector (the
other end of the special
Ethernet cable) to the
POWER & DATA OUT
port on the front of the
inline power injector.
Note: The ZyAIR starts. The ACTIVE LED on the front of the inline power injector turns on.

3 Initial Configuration

Use Internet Explorer 6.0 and later or Netscape Navigator 7.0 and later versions with JavaScript enabled.
Note: Even though you can connect to the ZyAIR wirelessly, it is recommended that you connect your
computer to the DATA IN port for initial configuration.
1 Launch your web browser. Enter 192.168.1.2 (the
ZyAIR's default IP address) as the address.
If the login screen does not display, see
5.1 on page 14 to set your computer's IP address.
ZyAIR G-5100
2 Click Login (the default password 1234 is already
entered).
Section
6