ZyXEL Communications VANTAGE RADIUS 50 User Manual page 70

Vantage RADIUS Server User's Guide
Accounting Port
Allowed Access Type
Allow Any IP Address
Shared Secret
Allowed Specified IP
Address/Network
Address
Apply
Allowed IP Address (max 20)
Add
No.
IP Address
Shared Secret
Description
Action
Delete
Allowed Network Address (max 5)
Add
No.
Network Address
Netmask
Shared Secret
5-8
Enter the port number of the accounting server. The default port number is 1813.
Make sure your wireless AP uses the same port number.
Enable this field to have Vantage RADIUS accept connections from all incoming
IP addresses using the shared secret below.
Type a password as the key to be shared.
The key must be the same on Vantage RADIUS and your wireless AP. The key is
not sent over the network.
Enable this field to allow only specified IP addresses or network address in this
list to access Vantage RADIUS.
Click this button to save your configurations back to Vantage RADIUS.
Click this button to add an IP address of a wireless AP to the Allowed IP
Address list.
This field displays the index number of allowed IP address entries in the list.
This field displays the IP address of an AP allowed to access Vantage RADIUS.
This field displays the key used to connect to your wireless AP.
This field displays the description entered in the Allowed IP Address screen to
identify your wireless AP.
Click the Modify button in this field to edit the information required to access your
wireless AP.
Select the check box next to the AP(s) description in this list that you want to
delete, then click Delete to remove this entry.
Click this button to add a range of IP addresses to the Allowed IP Address list.
This field displays an index number of allowed IP address entries in the list.
This field displays the IP address of an accepted source to access Vantage
RADIUS.
This field displays subnet mask used to specify the network range limits for
accepted IP addresses.
This field displays the description entered in the Allowed IP Address screen to
identify your wireless AP.
RADIUS Configuration