ZyXEL Communications VANTAGE RADIUS 50 User Manual page 125

-Click Add.
-Repeat the previous three steps for each default gateway you want to add.
-Click OK when finished.
7. In the Internet Protocol TCP/IP Properties
window (the General tab in Windows XP):
-Click Obtain DNS server address
automatically if you do not know your DNS
server IP address(es).
-If you know your DNS server IP address(es),
click Use the following DNS server addresses,
and type them in the Preferred DNS server and
Alternate DNS server fields.
If you have previously configured DNS servers,
click Advanced and then the DNS tab to order
them.
8. Click OK to close the Internet Protocol (TCP/IP) Properties window.
9. Click OK to close the Local Area Connection Properties window.
10. Turn on your Vantage RADIUS and restart your computer (if prompted).
1. Click Start, All Programs, Accessories and then Command Prompt.
2. In the Command Prompt window, type "ipconfig" and then press [ENTER]. You can also open
Network Connections, right-click a network connection, click Status and then click the Support tab.
Macintosh OS 8/9
Setting Up Your Computer's IP Address
Verifying Your Computer's IP Address
Vantage RADIUS User's Guide
D-9