Resetting Vantage Radius - ZyXEL Communications VANTAGE RADIUS 50 User Manual

Vantage RADIUS User's Guide
2.2

Resetting Vantage RADIUS

If you forget your password or cannot access the web configurator, you will need to use the RESET button
on the front panel of Vantage RADIUS to reload the factory-default configuration file. This means that you
will lose all configurations that you had previously and the password will be reset to "1234".
2.2.1 Using The Reset Button
Make sure the PWR LED is on (not blinking) before you begin. Press the RESET button for five seconds
or until the SYS LED begins to blink and then release it. When the SYS LED begins to blink, the defaults
have been restored and Vantage RADIUS restarts.
Introducing the Web Configurator 2-3