ZyXEL Communications VANTAGE RADIUS 50 Quick Start Manual page 17

2. Enter the IP
address of the
RADIUS
server in
dotted decimal
notation.
6.2 ZyAIR G-3000 Wireless Authentication Settings Example
The following example describes how to configure a wireless AP for use with a RADIUS server.
To change your ZyAIR's authentication settings, click the WIRELESS link under ADVANCED
and then the 802.1x/WPA tab. Configure your wireless AP to enable authentication through an
external authentication server (Vantage RADIUS).
Step 1. If your wireless client uses MD5 authentication, either choose static key exchange, or
disable dynamic key exchange.
Step 2.
The authentication database contains wireless station login information. Vantage
RADIUS is an external server. Use this drop-down list box to select the order the
wireless AP checks the databases to authenticate a wireless station.
Vantage RADIUS 50 Quick Start Guide
1. Enable these fields to activate
authentication and accounting services.
15
4. Type a shared secret (password) used to
authenticate wireless clients with your wireless AP.
3. Type the port number
of the RADIUS server.
The default port
numbers are shown.
You need not change
these values unless
your network
administrator instructs
you.